Fibex Reminder Watch 15 Alarms Manual – English

Charging

Remove the watch from the rubber strap.
Using the included USB cable, connect the watch to your power bank (5V) or computer (some charging cables for Android phones can also be used).
A full charge takes about 2 hours (100 displayed). Do Not Charge Overnight!
A full charge can last 6-12 days, depending on the usage of the watch.
To check if the vibration is working, press any button while the watch is charging.
When the battery is lower than 10%, the watch will power off and reset after 2 days. Charge In Time to save all settings!
Tips: The product is not waterproof. Do not wear it in the shower or swimming pool. If it gets wet, the watch will blink or lose the LED. Try to dry it with a hairdryer or wait a few days before charging.

Check time: Press the right button once.
Check month-date: Press the right button twice for month-date.
Check battery percentage: Press the right button three times (100 is full, reference value).
To set any function, operate within 5 seconds of the LED display.

When the screen is black, press the right button once to see the current time.
Quickly hold down the right button until only the hours are flashing, press the left button to increase the hours and the right button to decrease the hours.
When the hours are correct, quickly hold down the right button again until only the minutes are flashing, press the left button to increase the minutes and the right button to decrease the minutes.
When the minutes are correct, quickly hold down the right button again until 12– or 24– is flashing, press any button to change the 12/24-hour setting.

When the screen is black, press the right button twice to see month-date.
Quickly hold down the right button until only the months are flashing, press the left button to increase the months and the right button to decrease the months.
When the months are correct, quickly hold down the right button again until only the dates are flashing, press the left button to increase the dates and the right button to decrease the dates.
When the dates are correct, quickly hold down the right button again until the year is flashing, press the left button to increase the year and the right button to decrease the year.

Press the left button once: ALM (Alarm).
Press the left button twice: 12:00 (Alarm 1 time).
Press the left button three times: A1OF (Alarm 1 OFF).
Press the left button repeatedly to go through all 15 alarms (the sequence is ALM, Alarm 1 time, A1OF, Alarm 2 time, A2OF, Alarm 3 time, A3OF, …, Alarm 15 time, 15OF).
To set the alarm time: press the left button repeatedly until Alarm 1 time appears, quickly hold down the left button until only the hours are flashing, press the left button to increase the hours and the right button to decrease the hours. When the hours are correct, quickly hold down the left button again until only the minutes are flashing, press the left button to increase the minutes and the right button to decrease the minutes.
To turn on/off the alarm: when the display is black, press the left button repeatedly to see A1OF, then press the right button to change to A1ON / A1OF, OF=OFF (one second vibration).

Note:

The vibration can be stopped immediately by pressing any button, or it will stop automatically after 30 seconds.
The vibration time for Alarm 1 is 60 seconds, longer than other alarms. We recommend using Alarm 1 as the wake-up alarm. You can also set two additional alarms to support Alarm 1 as a snooze function.
The alarms will automatically repeat every day until they are turned off.
When the 15 alarms go off, silent vibration with time flashes to remind.
When the timer goes off, silent vibration with no flashes to remind, totally discreet.

To turn on the timer, when the screen is black, press the right button repeatedly to see Cdn (countdown), 1 min, 5, 10, 15, 20, 30, 45, 60, 90, 120, 180 min. When the desired timer length appears (1s or 30s only), quickly hold down the right button to turn on the timer.
Press the right button when the screen is black to see the remaining time, press again to see the current time, and again to see the battery percentage.
To turn off the timer, when the screen is black, press the right button to see the remaining time, then quickly hold down the right button for 7 seconds until “OFF” appears